contact us

Use the form on the right to contact us.

You can edit the text in this area, and change where the contact form on the right submits to, by entering edit mode using the modes on the bottom right.

12 Day Rd
Rockingham, WA, 6168
Australia

0423 284502

With over 20 years experience in wooden boat building and repair Tony O'Connor is pleased to discuss any aspect of Wooden boat construction mast and spar construction and repair as well as outfitting boats of all construction methods with boat owners in Perth Western Australia.

Tony is  also available to cut CNC parts to order for customers.

Tony is also delighted to be the Australian builder for Francois Viviers gaff yawl Jewell design and is the authorised  supplier of cnc kits for Jewell ,and will be happy to supply complete or partial  kits for other Vivier designs to  costumers requirements

 

Naval cadet boats

Construction of Jewell began in May 2014.

 

Finishing hull.

tony o'connor

The final few weeks passed in a flurry of activity as I pushed to complete the boat for the Hobart show, unfortunately there was very little time for pictures

 Side view of cockpit

Side view of cockpit

 Cockpit looking aft.

Cockpit looking aft.

 Cabin roof panel made from 2 cnc cut pieces.

Cabin roof panel made from 2 cnc cut pieces.

 Laminating jig for cabin roof.

Laminating jig for cabin roof.

 Laminating cabin roof.

Laminating cabin roof.

 Companionway looking forward.

Companionway looking forward.

 V berths.

V berths.

 Companionway looking aft, the spaces either side of the centreboard case are for a port-potti and esky.

Companionway looking aft, the spaces either side of the centreboard case are for a port-potti and esky.

 The centreboard is cut from three pieces of 18 mm ply, this is the centre piece with 30 kg of lead inserted.

The centreboard is cut from three pieces of 18 mm ply, this is the centre piece with 30 kg of lead inserted.